AeroShell 80 does not contain any additives except for very small amounts of pour point depressant, which aids to improve fluidity at very low temperatures and an anti-oxidant. AeroShell 80is approved for all aviation piston engines of civil aircraft when the use of an oil not containing a dispersant additive is required. Aeroshell 80 oil should also be used during the break-in of a new aviation piston engine or those recently overhauled. Specially blended High Viscosity Index base oil in AeroShell Oil 80 is designed to provide effective protection to engine components compared to conventional mineral oils. This ensures complete confidence and peace of mind knowing that your aircraft will perform reliably in between scheduled overhauls. AeroShell 80 is produced to meet fully the SAE specification J-1966 (Grades SAE 30, 40, 50 and 60 respectively). Military qualification approval and are listed on the Qualified Products List (QPL) issued by the US Navy and on the Technically Acceptable Products List (TAPL) issued by the UK Ministry of Defence. The blending plants employed to manufacture these oils also hold the approval of the specification authorities and this ensures that the high quality standard is always maintained.

This material has an initial shelf life of 4 years from the date of manufacture. This can be extended via a re-test which will be valid for an additional 2 years.

Specifications

Approved SAE J-1966 Grade 40

Mil-L-6082

Joint Service Designation OM-17