Aeroshell W80 is an ashless dispersant specifically developed for aviation piston engines and combines non-metallic additives with selected high viscosity index base oils to give exceptional stability, dispersancy and anti-foaming performance. No general rule exists for every engine type when choosing the correct grade of oil however, based on the average ambient outside temperature at engine start-up the most common grades are SAE 40, SAE 50 and SAE 60, which equates to AeroShell Oil W80, W100 and W120 respectively. Traditionally, the choice is associated with climatic zones, AeroShell W80 for cold climate regions -17 - 21°C. AeroShell W80 oil is produced to meet fully the SAE specification J-1899 (SAE 40). Furthermore, it has military qualification approval and are listed on the Qualified Products List (QPL) issued by the US Navy and on the Technically Acceptable Products List (TAPL) issued by the UK Ministry of Defence. The blending plants employed to manufacture these oils also hold the approval of the specification authorities and this ensures that the high quality standard is always maintained.

This material has an initial shelf life of 4 years from the date of manufacture. This can be extended via a re-test which will be valid for an additional 2 years.

Specifications

Approved SAE J-1899Grade 40

Mil-L-22851

Joint Service Designation OMD-160

Textron Lycoming: 301F

Continental: MHS 24B

Pratt & Whitney: Service Bulletin 1183