Includes

1 x PilotAware Rosetta

1 x 869.5MHz external antenna with BNC connector

1 x 1090MHz external antenna with BNC connector

2 x 2M LM240 CO-AX cable SMA Male to BNC Male.

1 x Remote GPS Antenna

1 x Anker 12V Power Supply

1 x 12V Power Socket

Cable Ties

Downloadable Installation Instructions.

1-year free PilotAware license key

The antennas in this kit are for internal use and the kit is recommended for Permit, EASA and C of A certified airframes. No certification is required on any aircraft for this installation.

On the back of each antenna, a 3M adhesive pad is provided for non-destructive mounting in any airframe. The antennas are also fitted with small suction cups that allow for the easy re-position of antennas whilst an optimum position is found or for permanent installation on perspex windshields, canopies and side windows.

Direct Communication

Each PilotAware Rosetta is equipped with two radio modules. The 1090MHz receiver uses unique custom software to receive signals from ADS-B, Mode-S and Mode-C transponders.

The PilotAware radio module directly receives location signals from other PilotAware devices and also traffic and flight information uplinked from our ATOM-GRID network. This is done in a way minimise  bandwidth use and spectral clutter.

Intelligent Rebroadcasting

Utilising the power of PilotAware’s secure and intelligent ATOM-GRID, critical traffic information is instantaneously uplinked to PilotAware Rosetta devices through secure ATOM stations. This includes ADS-B, Mode-S, Mode-C, FLARM and PilotAware transponders.

Connect with your Favourite Equipment

PilotAware Rosetta is compatible with a wide variety of electronic flight bags, mobile devices and glass cockpit displays. Integrate PilotAware with your favourite setup using the instructions in the knowledge-base. Integration to additional flight bags is continuously being updated as new products become available.

Maintain your Primary Visual Scan

PilotAware's Rosetta provides real time voice alerts from detected traffic that are transmitting a signal that is being received by PilotAware. The output from the Rosetta unit is via a Bluetooth connection, or a standard 3.5mm stereo audio jack. Voice alerts can be integrated into the communications package in your aircraft or connected directly to most noise cancelling headsets. Making it feel like an air traffic service in your aircraft.

Licence Key

The Rosetta comes complete with a first-year PilotAware Licence Key which needs to be updated annually on the anniversary of registration.